Factory source Universal Remote - KT-MDII Universal remote for Midea A/C – Yangkai

(1) “On / off” key: in standby mode, press the power on button to enter the running mode, and then press the power off button to enter the power off standby mode;

(2) “Mode” key: after power on, press this key, and the mode will cycle in the order of “automatic → refrigeration → dehumidification → air supply → heating → automatic”;

(3) “Wind speed” key: press this key, the wind speed of the internal fan will cycle in the mode of “automatic → low wind → stroke → high wind → automatic”;

(4) “Wind direction” key: press this key, the angle of the wind deflector will cycle in the order of “auto → position [1] → position [2] → position [3] → position [4] → position [5] → Auto”;

(5) “Swing wind” key: press this key, swing wind can be set to continuous swing and jog two ways of circulation;

(6) “Temperature @” key: press once to set the temperature to drop by one degree, control range: 16 ℃ – 31 ℃, no combo function;

(7) “Temperature ■” key: press once to set the temperature rise degree, control range: 16 ℃ – 31 ℃, no combo function;

(8) “Timing on” key: after the time is set, press the “timing on” key, the digital display area will display the last set timing on time, adjust the set time through the “hour” key and “minute” key, and the air conditioner will start at the set time; Press the “timing on” key again to cancel the timing on setting;

(9) “Time off” key: after the time is set, press the “time off” key in the power on state, the digital display area will display the last set time of time off, and adjust the set time through the “hour” key and “minute” key to turn off the air conditioner at the set time; Press the “timing off” key again to cancel the timing off setting;

(10) “Hour” key: in the state of timing and time setting, press once to increase one hour, with combo function;

(11) “Minute” key: in the state of timing and time setting, press once to increase ten minutes, with combo function;

(12) “Sleep” key: press this key, the remote control displays the sleep mode setting, the “” symbol is always displayed in the sleep display area, and the indoor fan automatically turns to low wind. After 8 hours of sleep, the sleep symbol is cancelled, and the indoor fan returns to the original wind speed operation; Press the “sleep” key again or press the “mode” key or “wind direction” key to exit the sleep function;

(13) “Reset” key: press this key with a small round bar with a diameter of 1 mm, and the remote control will return to the factory settings;

(14) “Time” key: press this key with a small round bar with a diameter of 1 mm to enter the time setting state. After setting, press this key again to indicate that the setting is completed and exit the time setting; Note: each time the remote control button is operated effectively, the symbol “” of the transmitted signal on the LCD will be on for one second and then disappear.